Product Snapshot: Welding Wire and Demolition Hammer
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/6.jpg?height=600&t=1446084488)
QuietJoint is a silicone-faced foam that compresses to fill interior openings. The insulation can be used to fill gaps between the ends of permanent or movable partitions as well as at the intersection of interior walls and curtain walls. In addition to its thermal-insulating qualities, QuietJoint acts as a noise dampener, with an STC53 or OITC38 rating that meets or exceeds that of the wall or partition. The insulation is available in full-story, 10-ft segments. EMSEAL Joint Systems; 508-836-0280; www.emseal.com
EMSEAL Joint Systems
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/2.jpg?height=600&t=1446084488)
Part of the M18 FUEL line of cordless tools, the M18 �-in. Hex Impact Driver provides 1,600 in.-lb of torque and a variable rpm of zero to 2,900. The impact driver features a three-mode drive control, allowing the operator to switch easily between precise and high-performance applications. It is powered by a Milwaukee M18 REDLITHIUM battery, which can operate in temperatures as low as 0� F. The tool also comes with a multivoltage charger that is able to charge all M12 and M18 batteries. Milwaukee Electric Tool Co.; 800-729-3877; www.milwaukeetool.com
密尔沃基电动工具有限公司
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/3.jpg?t=1446084488&width=900)
The GT-Series of electric-powered, two-stage air compressors are able to produce 15.5 cfm at 100 psi or 15.2 cfm at 175 psi. Features include powder-coated air tanks and heavy-duty cast-iron compressor pumps. A directional air shroud, finned intercooler and large flywheel help cool the air compressor during use. The protected mounted fittings and fully enclosed belt guards reduce jobsite damage. The GT-Series of air compressors are available with 8-, 15-, 17- or 30-gallon tanks. Jenny Products Inc.; 814-445-3400; www.jennyproductsinc.com
Jenny Products Inc.
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/5.jpg?height=600&t=1446084488)
The Hilti TE 5000-AVR Demolition Hammer weighs 12.6 lb and is able to deliver 4.4 ft-lb of impact energy. An Active Vibration Reduction system has a fully decoupled handle that minimizes vibration, while the built-in Active Cooling System is designed to prolong the tool's life span. The demolition hammer is well suited to concrete repair work and surface preparation and plaster and tile removal as well as creating wall breaches and through-penetrations in walls and floors. Hilti; 918-872-3265; www.hilti.com
Hilti
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/1.jpg?t=1446084488&width=900)
The Stoody 964 AP-G is a general-purpose hard-facing, flux-cored wire that can be welded in a vertical position, which can save time in the field because the equipment does not have to be moved into place for repairs. The wire can achieve a 64 Rockwell C hardness and produce crack-free deposits on Series 300 stainless and manganese steels. Other base metals have to be pre-heated and post-heated as needed. Packaged in 33-lb spools, the wire is available in 0.045-in. and 1/16-in. diameters. Thermadyne Industries; 636-728-3000; www.thermadyne.com
Thermadyne Industries
![Product Snapshot: Welding Wire and Demolition Hammer](http://www.phoneitt.com/ext/resources/archives/products/materials/2012/extras/0507/4.jpg?height=600&t=1446084488)
The WAL-JHE500-120V-25 Scaffold-Mount Work Light features a 500-watt quartz halogen lamp that illuminates a 30,000-sq-ft work area. The lamp's J-bracket allows it to be mounted on the rungs of a ladder or scaffolding railing. The bracket is adjustable from 26 in. to 43 in. to accommodate different mounting surfaces. The adjustable center post can be extended up to three feet. The work light can be powered by an 120-volt source and comes with a 25-ft abrasion- and chemical-resistant cord. Larson Electronics; 800-369-6671; www.magnalight.com
Larson Electronics
May 7, 2012
No Comments